Contact Us

SKU: 0K-0276-901
The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: EC-A236-525
Optical Sensor Switch for Optical Encoder Disc.

SKU: 0K-2236-902
Optical Disc/Gear Assembly includes the motor pulley and optical disc.

SKU: EB-3236-500
The Digital Timer Board is used on the 120V, 230V and 100V Digital MegaMag Genie magnetic stirrer, and can be easily installed. Attaches with four mounting screws from inside of the unit.

SKU: 0K-4236-903
The 120V Motor Assembly for the Analog MegaMag Genie and Analog QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-4246-903
The 230V Motor Assembly for the Analog MegaMag Genie and Analog QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-4286-903
The 100V Motor Assembly for the Analog MegaMag Genie and Analog QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-3236-903
The 120V Motor Assembly for the Digital MegaMag Genie and Digital QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wire

SKU: 0K-3246-903
The 230V Motor Assembly for the Digital MegaMag Genie and Digital QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-3286-903
The 100V Motor Assembly for the Digital MegaMag Genie and Digital QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: EL-3L36-575
The Digital Keypad is used on the 120V, 230V and 100V Digital MegaMag Genie LR magnetic stirrer. Thread the cable through the slot in housing. Peel and Stick Adhesive back adheres keypad easily to casting. Then connect the ribbon cable.

SKU: 0K-3L36-901
Magnet assembly includes magnets, plate and pulley.

SKU: EB-3236L-500
The Digital Timer Board is used on the 120V, 230V and 100V Digital MegaMag Genie LR magnetic stirrer, and can be easily installed. Attaches with four mounting screws from inside of the unit.

SKU: 0K-3L36-902
Optical Disc/Gear Assembly includes the motor pulley and optical disc.

SKU: 0K-3L36-903
The 120V Motor Assembly for the Digital MegaMag Genie LR magnetic stirrer, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-3L46-903
The 230V Motor Assembly for the Digital MegaMag Genie LR magnetic stirrer, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-2236-901
Magnet assembly includes magnets, plate and pulley.

SKU: 0M-0236-209
The Push-on Knob can be easily installed by pulling off the old knob and pushing on the new knob.

SKU: 318-0510-02
The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0246-901
The 230V Line Cord, No Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0256-901
The 230V Line Cord, Euro Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0266-901
The 230V Line Cord, British Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0286-901
The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: ECP0021
This kit contains the Australian Plug only, which can be easily installed on the 230V No Plug Line Cord.

SKU: EPP0005
This 120V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed. The part in your unit should look the same as the picture, otherwise refer to Part No. 0A-0236-051.

SKU: EB-0246-500
This 230V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed.

SKU: HWP0004
Four adhesive mounted feet.

SKU: PP-2236-400
This kit contains both the top and bottom housing covers.

SKU: HWP0058
This is the belt between the motor pulley and the magnet pulley.

SKU: EL-2236-575
The Digital Keypad is used on the 120V, 230V and 100V Digital MegaMag Genie magnetic stirrer. Thread the cable through the slot in housing. Peel and Stick Adhesive back adheres keypad easily to casting. Then connect the ribbon cable.

SKU: 0K-2236-900
The Analog Nameplate has a peel and stick adhesive back, which adheres easily to the housing.

SKU: ESP0001
This is the Power Switch that illuminates red for the 100V and 120V models.

SKU: ESP0002
This is the Power Switch that illuminates green for the 230V and 240V models.

SKU: 0K-3L86-903
The 100V Motor Assembly for the Digital MegaMag Genie LR magnetic stirrer, can be easily installed using a 1/4" nut driver and then re-attaching the wires.