Contact Us

SKU: 0K-0276-901
The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: ESP0006
This is the Power Switch for the 100V and 120V Enviro-Genie and Incubator-Genie.

SKU: ESP0007
This is the Power Switch for the 230V Enviro-Genie and Incubator-Genie.

SKU: 0A-1400-002
Complete Motor Assembly, with gears and drive shaft. This Motor Assembly is used on all voltages of the Incubator-Genie.

SKU: 0K-1400-902
This power supply is used on all voltages of the Incubator-Genie.

SKU: 0K-1400-907
Four Feet with Screws Kit for Incubator-Genie.

SKU: 0K-1400-903
This heating element kit is used on all voltages of the Incubator-Genie. The kit includes two Heating Elements.

SKU: 0K-1400-900
This is the LED Display Board that attaches to the front panel of the Incubator-Genie.

SKU: 0K-1400-901
This is the LED Display Keypad that attaches to the front panel of the Incubator-Genie. Thread the cable through the slot in sheet metal. Peel and Stick Adhesive back adheres keypad easily to sheet metal. Then connect the ribbon cable.

SKU: 0M-1200-214
Knob on the right of the unit, used to secure the Magnetic Platform Assembly for the Enviro-Genie and Incubator-Genie.

SKU: 0K-1200-905
This is the main chamber Temperature Sensor that sits behind the inner fan in the Enviro-Genie and Incubator-Genie.

SKU: 0K-1200-906
This is the inner Fan that creates air flow within the chamber of the Enivro-Genie and Incubator-Genie.

SKU: 318-0510-02
The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0246-901
The 230V Line Cord, No Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0256-901
The 230V Line Cord, Euro Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0266-901
The 230V Line Cord, British Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0286-901
The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: ECP0021
This kit contains the Australian Plug only, which can be easily installed on the 230V No Plug Line Cord.

SKU: 0A-1100-030
This assembly contains the magnetic platform, which is used to rotate or rock samples when used with the appropriate magnetic accessories. The magnetic platform measures 200 x 340mm (8 x 14in) and is included with the Roto-Shake Genie, Enviro-Genie and Incubator-Genie.Print this Page

SKU: 0K-1200-915
Complete Door Assembly inludes window, insulation and hinge for Enviro-Genie and Incubator-Genie.

SKU: 0K-1200-909
Smaller Gear with Pin used for Rocking Mode.