Contact Us

SKU: 0K-0276-901
The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0401-905
The 230V Motor Assembly for the MicroPlate Genie and Multi-MicroPlate Genie can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-0400-905
The 120V Motor Assembly for the MicroPlate Genie and Multi-MicroPlate Genie can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: EB-0400-500
The Timer Board is used on the 120V, 230V and 100V MicroPlate Genie and Multi-MicroPlate Genie.

SKU: PP-T236-400
The Timer Knob Set includes a small grey timer knob and a black speed control knob, which can be easily installed. Gently pull off the old gray knob. A hex wrench (Allen key) is needed to remove the black speed control knob.

SKU: ESP0010
This is the push button switch for the MicroPlate Genie and Multi-MicroPlate Genie. The unit must be opened and wires disconnected to assemble the switch.

SKU: 0M-0400-202
Replacement mat for the MicroPlate Genie, which goes underneath the microplate.

SKU: HWP0045
Rubber bumper that holds microplate in place. Used on the MicroPlate Genie and Multi-MicroPlate Genie. Simply pull off old bumper and push-on new bumper. Please note that the MicroPlate Genie uses (2) bumpers and the Multi-MicroPlate Genie uses (8) bumpers.

SKU: ECP0021
This kit contains the Australian Plug only, which can be easily installed on the 230V No Plug Line Cord.

SKU: 0K-0286-901
The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0266-901
The 230V Line Cord, British Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0256-901
The 230V Line Cord, Euro Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0246-901
The 230V Line Cord, No Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 318-0510-02
The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0400-900
Shock Absorbing Feet, MicroPlate Genie (4)

SKU: 0K-0405-905
The 100V Motor Assembly for the MicroPlate Genie and Multi-MicroPlate Genie can be easily installed using a 1/4" nut driver and then re-attaching the wires.