Contact Us

SKU: 0K-0276-901
The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-P286-915
The 100V Motor Assembly for the Vortex-Genie Pulse can be easily installed using a 1/4" nut drvier and then re-attaching wires.

SKU: EPP0008
The on/off Timer Switch is easily installed by attaching to the front of the unit with a nut and re-attaching the two wires.

SKU: 0A-D236-021
The 120V Motor Assembly for the Disruptor Genie can be easily installed using a 1/4” nut driver and then re-attaching the wires.

SKU: 0A-D246-021
The 230V Motor Assembly for the Disruptor Genie can be easily installed using a 1/4” nut driver and then re-attaching the wires.

SKU: 0A-D286-021
The 100V Motor Assembly for the Disruptor Genie can be easily installed using a 1/4” nut driver and then re-attaching the wires.

SKU: 0M-D236-400
Knob is easily installed by pushing onto the timer shaft.

SKU: 0A-D236-010
This kit contains the Stainless Steel Mounting Bracket and Spring that attaches with adhesive strips onto the back of the Disruptor Genie and Digital Disruptor Genie casting.

SKU: SPP0001
To remove the old spring you may need to bend the tab that the spring is hooked onto and then replace with the new spring.

SKU: EL-DD36-575
The Digital keypad is used on the 120V, 230V and 100V Digital Disruptor Genie. Thread the cable through the slot in casting. Peel and Stick Adhesive back adheres keypad easily to casting. Then connect the ribbon cable.

SKU: 0K-P246-915
The 230V Motor Assembly for the Vortex-Genie Pulse can be easily installed using a 1/4" nut drvier and then re-attaching wires.

SKU: 0K-P236-915
The 120V Motor Assembly for the Vortex-Genie Pulse can be easily installed using a 1/4" nut drvier and then re-attaching wires.

SKU: 0K-P236-904
This kit contains the Eccentric with Clamp Assembly, which includes the Eccentric, Bearing Retainer, Eccentric Clamp and Encoder Disc. This assembly is used on the Vortex-Genie Pulse Motor Assembly.

SKU: 0K-0236-408
Bottom Closure with Feet Kit

SKU: SI-0565
Universal Microtube Holder

SKU: 318-0510-02
The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0246-901
The 230V Line Cord, No Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0256-901
The 230V Line Cord, Euro Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0266-901
The 230V Line Cord, British Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0286-901
The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: ECP0021
This kit contains the Australian Plug only, which can be easily installed on the 230V No Plug Line Cord.

SKU: 566-0028-00
The Spring, Extension, Eccentric can be easily attached from the Eccentric Clamp to the Bottom of the Motor Mounting Plate.

SKU: EB-DD36-500
The Digital Timer Board is used on the 120V, 230V and 100V Digital Disruptor Genie, and can be easily installed. Attaches with four mounting screws from inside of the unit.