Contact Us

SKU: 0K-0276-901
The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-1100-902
This Power Supply Board is used on all voltages of the Roto-Shake Genie and Rotator Genie.

SKU: 0A-1100-060
This is the Potentiometer that mounts on the front of the unit, which controls the speed.

SKU: EFP0001
Fuse for all voltages of the Roto-Shake Genie and Rotator Genie.

SKU: EPP0001
Panel Mount Fuse Holder.

SKU: 0A-1100-020
Complete Motor Assembly, with gears and drive shaft. This Motor Assembly is used on all voltages.

SKU: 0K-1100-900
This kit includes a black plastic Hex Shaft and Pin. To replace this part, the old Pin must be removed. A replacement Pin is provided to attach the new Hex Shaft

SKU: KBP0002
Knob on the front of the unit to control speed.

SKU: 0A-1100-030
This assembly contains the magnetic platform, which is used to rotate or rock samples when used with the appropriate magnetic accessories. The magnetic platform measures 200 x 340mm (8 x 14in) and is included with the Roto-Shake Genie, Enviro-Genie and Incubator-Genie.Print this Page

SKU: 0M-1100-212
Knob on the right of the unit, used to secure the Magnetic Platform Assembly.

SKU: 0K-1100-901
Smaller Gear with Pin used for Rocking Mode.

SKU: WAP0007
This Nylon Washer is used on the Lock Shaft.

SKU: ESP0002
This is the Power Switch that illuminates green for the 230V and 240V models.

SKU: ESP0001
This is the Power Switch that illuminates red for the 100V and 120V models.

SKU: HWP0004
Four adhesive mounted feet.

SKU: 318-0510-02
The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0246-901
The 230V Line Cord, No Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0256-901
The 230V Line Cord, Euro Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0266-901
The 230V Line Cord, British Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0286-901
The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: ECP0021
This kit contains the Australian Plug only, which can be easily installed on the 230V No Plug Line Cord.

SKU: SI-1123
Clip Plate 10-13mm tubes

SKU: SI-1124
Clip Plate 15-17mm tubes

SKU: SI-1125
Clip Plate 28-30mm tubes

SKU: SI-1126
Magnetic Stainless Steel Bag Strip (Pack of 16)

SKU: 0A-1100-070
Metal Rocker Tray

SKU: SI-R150
The Stacking Tray easily mounts on top of the rocking tray supplied with unit to double rocking capacity. No tools required. Latches on magnetically.