Contact Us

SKU: 0K-0276-901
The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-A246-915
The 230V Motor Assembly for the Digital Vortex-Genie 2 and ABI Digital Vortex-Genie 2 Mixers can be easily installed using a 1/4” nut driver and then re-attaching the wires.

SKU: 0K-A236-915
The 120V Motor Assembly for the Digital Vortex-Genie 2 and ABI Digital Vortex-Genie 2 Mixers can be easily installed using a 1/4” nut driver and then re-attaching the wires.

SKU: 0K-P236-904
This kit contains the Eccentric with Clamp Assembly, which includes the Eccentric, Bearing Retainer, Eccentric Clamp and Encoder Disc. This assembly is used on the Vortex-Genie Pulse Motor Assembly.

SKU: EB-A236-500
The Digital Timer Board is used on the 120V, 230V and 100V Digital Vortex-Genie 2 and ABI Digital Vortex-Genie 2 Mixers, and can be easily installed. Attaches with four mounting screws from inside of the unit.

SKU: EL-A236-575
The Digital Control Panel is used on the 120V, 230V and 100V Digital Vortex-Genie 2 and ABI Digital Vortex-Genie 2 Mixers. Thread the cable through the slot in casting. Peel and Stick Adhesive back adheres keypad easily to casting. Then connect the ribbon cable

SKU: 566-0028-00
The Spring, Extension, Eccentric can be easily attached from the Eccentric Clamp to the Bottom of the Motor Mounting Plate.

SKU: ESP0005
The Micro Switch can be easily installed using a philips head screw driver. Please note, this micro switch has two tabs. If your micro switch has three tabs you will need to order Part No. ESP0003.

SKU: ECP0021
This kit contains the Australian Plug only, which can be easily installed on the 230V No Plug Line Cord.

SKU: 0K-0286-901
The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0266-901
The 230V Line Cord, British Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0256-901
The 230V Line Cord, Euro Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0246-901
The 230V Line Cord, No Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 318-0510-02
The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 580-2013-00
Rubber Cover for 3-inch Platform

SKU: 146-3011-00
Pop-off Cup

SKU: 0K-0500-901
3-inch Platform without Rubber Cover

SKU: 0K-0236-408
Bottom Closure with Feet Kit

SKU: 0K-A286-915
The 100V Motor Assembly for the Digital Vortex-Genie 2 and ABI Digital Vortex-Genie 2 Mixers can be easily installed using a 1/4” nut driver and then re-attaching the wires.