Contact Us

SKU: 0K-0276-901
The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: ESP0005
The Micro Switch can be easily installed using a philips head screw driver. Please note, this micro switch has two tabs. If your micro switch has three tabs you will need to order Part No. ESP0003.

SKU: 0K-0236-904
This kit contains the Eccentric with Clamp Assembly, which includes the Eccentric, Bearing Retainer, and Eccentric Clamp. This assembly is used on the Motor Assembly.

SKU: 0K-0236-905
The 120V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.

SKU: 0K-0246-915
The 230V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.

SKU: 0K-0286-915
The 100V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.

SKU: 566-0028-00
The Spring, Extension, Eccentric can be easily attached from the Eccentric Clamp to the Bottom of the Motor Mounting Plate.

SKU: ESP0008
This kit contains a toggle switch that can be easily installed. For use on the Vortex-Genie 2T Timer Genie Models ONLY. Please note, although the switches look the same this switch can not be used on the Vortex-Genie 2 mixer.

SKU: EBP0001
The Timer Board Kit is used on the 120V, 230V and 100V Vortex-Genie 2T Mixers. This kit contains the Timer Board and Toggle Switch.

SKU: ECP0021
This kit contains the Australian Plug only, which can be easily installed on the 230V No Plug Line Cord.

SKU: 0K-0286-901
The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0236-408
Bottom Closure with Feet Kit